Shooting Accessories

Made by Pedersoli, this Remington copper bodied flask is embossed with the classic “faithful dog” scene.  It holds 7 ounces and has a spring loaded flask-type valve with a 24 grain spout for 44 cal. or select the 15 grain spout...

Traditions Northwest Accelerator Breech Plug removes in 3 turns by hand and requires no tools! Works ONLY with Northwest Magnum Accelerator models. This part is not interchangeable with non-Accelerator Northwest Magnum models and not for use with bolt...

October Countrys fine stainless steel wire is attached to a brass handle. Screwing into a brass sleeve prevents the steel wire form bending during storage.

Ox Yoke Wads are the traditional wads for shotgunners. Over Shot wads now come in individual 100 packs.  Powder goes in first, then over powder wad, then the cushion wad.  Next is the shot, then the over shot wad.

A must for inline shooters. The steel wrench will remove 209, Musket and #11 nipples PLUS the breech plug on Traditions and CVA inlines. Steel handle included.

OX YOKE Wads are the traditional wads for shotgunners. The Over Powder wads and the Over Shot wads now come in individual 100 packs. Powder goes in first, then over powder wad, then the cushion wad. Next is the shot, then the over shot wad.

OX YOKE Wads are the traditional wads for shotgunners. The Over Powder wads and the Over Shot wads now come in individual 100 packs. Powder goes in first, then over powder wad, then the cushion wad. Next is the shot, then the over shot wad.

500 packs. OX YOKE Wads are the traditional wads for shot gunners. The Over Powder and Over Shot wads are packaged separately in the 500 packs. Powder goes in first, then over powder wad, then the cushion wad. Next is the shot, then the over shot wad.

OX YOKE Wads are the traditional wads for shotgunners. The cushion wads (pictured) are pre-conditioned with Wonder Lube. They are solid and will not come apart. Cushion wads are also used when shooting large bore round ball. We have the new cushion wads...

Musket nipples are made from 416 alloy (12% Chromium), the first free machining stainless alloy with Martensitic qualities (hardenable, tempers normally, and is magnetic unlike most stainless alloys). Stronger, tougher, more resistant to battering, 416...

These items are essential for every black powder shooter. Just unscrew the powder can lid and screw in the pouring spout. Now you can fill your flask or your powder horn with ease. The larger white cap is 2" wide inside, the middle black one is 1 1/2"...

These spouts will fit all powder flasks, except for small .31 caliber flasks. Spouts are made of solid brass and can be shortened to give the exact charge needed. CAUTION: These measures are to be used with black powder or Pyrodex only. Charge size is...